There are a wide array of different kinds of stains. Each type of stain should be applied in a specific way to achieve the desired look. Hence, a special kind of sensitivity is required here. A carpenter’s intuition is very much required in choosing the right stain to apply. This is why, as the leading carpenter in Norwich, today we have brought to you the carpenter’s way of staining a table. Let’s dive right in to the deep water of right way to stain a table.
Choosing the Right Stain
When it comes to choosing the right stain, there are a bunch of things you need to take into account. The first and foremost is obviously the type of wood that your table is made out of. Some woods, such as oak, are more porous and, thereby, more likely to absorb the stain. On the other hand, woods, like maple, are less porous and will consequently absorb less. Next, you should move on to pick the colour of the stain. You can choose from a wide variety of colours, ranging from light to dark.
Last but not the least, there is the question of finish, i.e. the finish you would like to have for your table. While a high gloss finish will make the table more resistant to spills and stains, while a matte finish will allow the wood grain to show through more. A carpenter can help you decide better on the nature of your stain.
Applying the Stain
Applying the stain to the table might not be quite a difficult ordeal. You can also do it through a DIY approach. Firstly, you need to sand the table with a medium-grit sandpaper. This will help create a smooth surface for the stain to adhere to. You should wipe the table down with a damp cloth afterwards to remove the dust. You should proceed through working in a small section and avoid leaving any puddles of stain. After this stain has been applied, you should allow it to dry for several hours before going to apply a second coat.
Sealing the Table
When the first two steps are done, you should move on to step three. Depending on the wood involved, you may or may not need to seal the table before staining. If your table is made of pine, fir, or another softwood, they may absorb the stain rapidly and unevenly. As a general guideline, you should seal it before staining if the grain of the wood is visible.
Are you looking for superb staining solutions for your furniture? Nigel Stone can help you out with our extraordinary services and commitment to your taste and preference.